User`s manual

Chapter 2—Operation 2-4
Setting DIP Switch
Flash ROM BIOS update
In order to keep up with the latest system BIOS, your DeskNote may be upgraded.
Consult your dealer for further information. The DIP-Switch needs to be set in the
On
position when updating the existing system BIOS. The DIP-Switches should be
reset to the
Off
position after BIOS updating is complete.
DIP Switch (SW1) Purpose
SW1-1 SW1-2 Flash ROM BIOS
Off Off Existing BIOS
On On Updating BIOS
CPU Core Frequency Settings
It is not necessary to make any changes to jumper settings. The Core
Frequency will auto configure one the system s powered on.
Celeron & BGA1 Processor VTT Select
CPU Frequency S3-1 S3-2
1.5V (Socket 370) ON ON
1.6V (BGA1) OFF OFF