Specifications

4-9
Chapter 4: Troubleshooting
Printer
Problem: The printer is not ready.
Solution: The printer power cord is not plugged into or the connector is
not correctly connected.
Problem: The printer can not print.
Solution 1: The printer is not power on. Please turn on the printer.
Solution 2: The printer is not in “connected” status. Please set the printer
in “connected” status.
Solution 3: The paper is used up. Please add the paper.
Solution 4: The printer driver is not installed or correctly chosen. Please
check the system.
Solution 5: The printer for network is not connected with the network.
Problem: The printer prints incorrect data.
Solution 1: The printer driver is not installed or correctly chosen.
Solution 2: The printer power cord is not plugged into or the connector is
not correctly connected.
ATI DVD Play (Optional)
Problem: When the DVD station is playing, pressing (Fn) Hot keys
quickly at the same time, the DVD station will stop running
in the normal Windows system.
Solution: Please avoid pressing the Hot key quickly and continuously.
For example, when use the Fn key to control the voice volume,
press the Fn key, stopping seconds each time before pressing
again. Or go to Windows 95/98, click the icon of volume at
the right-bottom corner to control the voice volume.