Specifications
Attaching an External Monitor (CRT)
The computer is capable of displaying information not only on the LCD,
but also on SVGA compatible displays attached to the computer.
Information can be displayed on both the LCD and the external monitor
simultaneously. Enter the System Configuration Utility (SCU) to select
the appropriate parameters or use the Fn + F6 keys (refer to Chapter 2,
Using Hot Keys).
1. Turn the system power off.
2. Connect the cable to the CRT port on the rear of the Notebook
Computer (Step 1 in Figure 2-24).
3. Tighten the screws that fasten the cable to the CRT port (Step 2 in
Figure 2-24).
4. Insert the other end of the cable to the external monitor.
5. Turn on the Notebook Computer.
Figure 2-24
Chapter 2: Operation 2-35