Specifications

Attaching a Serial Mouse
The serial port features a 9-pin connector. You can connect any serial
device such as a mouse to this port.
1. Turn the system power off.
2. Connect the cable to the serial port on the rear of the Notebook
Computer (Step 1 in Figure 2-22).
3. Tighten the screws that fasten the cable to the serial port (Step 2 in
Figure 2-22).
4. Turn on the Notebook Computer.
In addition, you may need to install the manufacturer-supplied driver for
the serial mouse. Refer to the device’s user’s guide for more information.
Figure 2-22
Chapter 2: Operation 2-33