Specifications

Hard Disk Standby
The system will turn off the Notebook’s hard disk drive motor if it has not
been accessed after a specified period of time. The motor will be turned
back on once the system attempts to read or write data to it.
Global Standby
In Global Standby mode, the CPU clock will be stopped and most
controllable peripheral devices will be powered off. If the idle timer
expires before any system activity is detected, the system will change from
Standby mode into Suspend mode.
Suspend and Resume
When at extremely low power the system will halt operations yet retain all
its programming. This is called Suspend Mode. The Suspend Mode
features three levels: Powered-On-Suspend (POS) mode, Suspend-To-
RAM (STR) mode, and Suspend-To-Disk (STD) mode.
Be sure not to initiate the Suspend Mode when any of the disk drives
is accessed such as HDD, FDD and CD-ROM drive.
The system operation can be returned to exactly where it was suspended
when wake-up event occur. This is called Resume.
2-28 User’s Manual