Specifications

Write-Protecting Diskettes
Diskettes can be write-protected to prevent files from being accidentally
erased or destroyed. To write-protect a 3.5” floppy diskette, move the
built-in write-protect tab to the write-protect position, (“up” so that you
can see through the “hole” in the upper, right-hand corner of the diskeet).
Putting the write protect tab back “down” will enable you to write data on
the disk again.
Do’s and Don’ts
• Always make backup copies of your software and data diskettes.
• Keep diskettes away from magnetic fields.
• Do not remove diskettes from the drive while the diskette “in-use”
light in on.
• Do not open or remove the protective shutter which covers the
diskette’s media.
• Do not allow dust or moisture to collect on diskettes.
• Do not bend or throw diskettes.
• Do not clean diskettes with liquids or solvents.
Chapter 2: Operation 2-15