Specifications

Using Hard Disk Drive
The hard disk drive is mounted in a removable case and may therefore be
taken out to accommodate other 2.5” IDE hard disk drives with a height of
12.7mm. The system supports drives with capacities greater than 528MB
through the Logical Block Addressing (LBA) mode. It also supports
Programmed I/O (PIO) mode 4 and provides a high performance data
transfer rate at speeds up to 33 MBytes/second (ATA-33).
Removing
1. Turn the system power off.
2. Turn the Notebook over.
3. Remove the HDD cover (Figure 2-9).
4. Disconnect the cable (Figure 2-9).
5. Detach the HDD case from the Notebook (Figure 2-9).
Figure 2-9
Inserting
Reinstall the Hard Disk Drive in the reverse order of removal.
2-12 User’s Manual
HDD Cover
HDD Case
Cable