Specifications

Accessing the 2-Pole DIP Switch
Access the 2-pole DIP Switch to set the CPU I/O voltage.
1. Turn the system power off.
2. Turn the Notebook over.
3. Remove the CPU cover. Use the 2-pole DIP Switch to set the
configuration (Figure 2-5).
Figure 2-5
CPU I/O Voltage Settings
The correct configuration for CPU I/O voltage is listed as follows:
CPU I/O Voltage 1 2
2.5 V On Off
3.45 V On On
If what you install is Intel Pentium processor at 3.3V I/O voltage, please
set the same as 3.45V.
Chapter 2: Operation 2-7