Instruction manual

5
Equipment overview and parts purchased
1 Unlatching button
for the base unit
2 Base unit
3 Water tank catch
4 Unlatching buttons
of the water tank
5 Water tank
6 Cleaning head
7 Carpet glider
8 Pivot of the cleaning head
9 Indicator lamp
10 Power cable
11 Lower hook for holding
the cable
12 Upper hook for holding the
cable
13 Handle
14 Middle piece
15 Unlatching lever of the
cleaning head
16 Floor cleaning cloth
17 On/off switch
18 Handle bar
19 Cable holder
20 Steam activator on the
stand of the floor cleaner;
on the base unit, the steam
activator is located on the
back of the handle
21 Grout Brush
22 Adapter
23 Direct Steam Nozzle
24 Spatula attachment
25 Round Scrubbing Brush
13
1
2
4
5
7
12
11
10
4
9
8
3
6
20
19
18
17
16
21 22 23 24 25
14
15
6
Before using for the first time
Before using the appliance you must:
• unpack the purchased parts,
• assemble the stand for the floor steam cleaner.
❐ Keep children away from the packaging material. It represents a hazard, including risk of
suffocation.
Unpack all the parts and check the purchased parts for completeness (see chapter “Equipment
overview and parts purchased”) and for transport damage. If there is damage to any of the
parts, do not use them(!); contact customer services instead.
Assemble the stand for the floor steam cleaner.
The stand for the floor steam cleaner is supplied in three parts: the handle (18), the middle
piece (14) (with base unit), and the cleaning head (6).
CAUTION!
Unpacking
1. Insert the handle onto the middle piece and screw both
parts together. To do this, insert the screw supplied into
the side hole of the handle (and middle piece) and turn it.
2. Insert the steam outlet nozzle at the bottom end of the
middle piece into the adapter of the cleaning head. You
must hear it click into place.
3. To put the appliance away, wind the power cable (10)
loosely around the top and bottom hooks provided for
holding the cable.
• If you want to remove the cleaning head, press the
unlatchIng lever (15) where the cleaning head joins the
middle piece and remove it.