Technical data

Issue No.1 Combined Manual 24.10.07
3
USER INSTRUCTIONS
BOILER OPERATION
The Boiler Control Thermostat responds to the temperature of the water within the boiler and
switches power to the burner when heat is required.
The burner has an independent control system which regulates the firing and (shut-off) of the
burner.
Automatic firing of the burner will occur when the water temperature within the boiler falls below the
control thermostat set point which will continue to run until the water temperature rises to the
temperature set on the boiler control thermostat.
SWITCHING THE BOILER ON
- Check there is water in the system.
- Check radiator valves are on.
- Turn on oil supply.
- Switch electrical supply to the boiler on (including time clock) and then set the boiler control
thermostat to recommend setting.
Reset Button