User Guide

I nst allat ion

Selection of installation equipment

Cut out the work surface according to the sizes shown in the drawing.

For the purpose of installation and use, a minimum of 5 cm space shall be

preserved around the hole. Be sure the thickness of the work surface is at least

13mm. Please select heat-resistant work surface material to avoid larger

deformation caused by the heat radiation from the hotplate. As shown below:

L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)

590 520 55 51 560+4

490+4

50 mini

Under any circumstances, make sure the ceramic cooker hob is well ventilated

and the air inlet and outlet are not blocked. Ensure the ceramic cooker hob is in

good work state. As shown below:

Note: The safety distance between the hotplate and the cupboard above

the hotplate should be at least 760mm.