User manual

I570 Motherboard User Manual
53
7.8 Power Management Setup
This section sets configurations for your Power Management function setting. The
screen shows some items for user to select. Once an item selected, a submenu appears.
Details follow.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI function [Enabled]
Item Help
ACPI Suspend Type [S1(POS)]
Menu Level ►
Power Management [User Define]
Video Off Method [V/H SYNC+Blank]
Video Off In Suspend [Yes]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTTN [Delay 4 Sec.]
Wake-Up by PCI card [Enabled]
Run VGABIOS if S3 Resume [Auto]
Power On by Ring [Enabled]
Resume by Alarm [Disabled]
X Date(of Month) Alarm 0
X Time(hh:mm:ss) Alarm 0 : 0 : 0
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save Esc:Exit F1:Ge nenal Help
F5: Previous Values F6: Fail -Safe Defaults F7: Optimized Defaults
ACPI Function
Enable this function to support ACPI (Advance Configuration and Power Interface).
Power Management
This field allows you to select the type of power savi ng management modes. There
are two selections for Power Management.
Min. Saving Minimum power management
Max. Saving Maximum power management.
User Define Each of the ranges is from 1 min. to 1hr. Except for HDD Power Down
which ranges from 1 min . to 15 min.