User manual

I570 Motherboard User Manual
50
On Chip IDE Device: IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to 33Mb/sec
with the Ultra DMA/33 feature. The options are Auto and Disabled.
On Chip IDE Device: On Chip Serial ATA Device
The integrated peripheral controller contains an SATA interface with support for
twp SATA channels. The default setting is Auto.
On Board Device:
The setting of Enabled allows you select USB Controller / USB2.0 Controller /
USB Keyboard support / USB Mouse Enable or Disable. And you also could
select Azalia/Audio. The default setting is Auto.
Onboard Serial Port
These fields allow you to select the onboar d serial ports and their addresses.
The default values for these ports are:
On Board Serial Port 1 Disable
3F8/IRQ4
2F8/IRQ3
3F8/IRQ4
2F8/IRQ3
On Board Serial Port 2 Disable
3F8/IRQ4
2F8/IRQ3
3F8/IRQ4
2F8/IRQ3
UART Mode Select
This field determines the UART 2 mode in your computer. The default value is
Normal. Other options include IrDA and ASKIR.
Onboard Parallel Port
These fields allow you to select the onboard parallel ports and their addresse s.
The default values for these port is:
On Board Parallel Port Disable
378/IRQ7
278/IRQ5
3BC/IRQ7