User manual

I570 Motherboard User Manual
42
Minute : 00 to 59
Second :00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or +/-
keys to set the current time.
IDE Channel Master/Slave
The onboard PCI-IDE connector provides one channel for connecting up to
one IDE hard disks or other IDE device .
Press <Enter> to configure the hard disk. The se lections include None, Auto,
and Manual. Select ‘Manual’ to define the drive information manually. You will
be asked to enter the following items.
Cylinder : Number of cylinders
Head : Number of read/write heads
Precomp : Write precompensation
Landing Zone : Landing zone
Sector : Number of sectors
Video
This field selects the type of video display card installed in your system. You
can choose the following video display cards :
EGA/VGA For EGA, VGA, SEGA, SVGA
or PGA monitor adapters. (default)
CGA 40 Power up in 40 column mode.
CGA 80 Power up in 80 column mode.
MONO For Hercules or MDA adapters.
Halt On
This field determines whether or not the system will halt if an error is detected
during power up.
No errors
The system boot will not be halted for any error that may be detected.
All errors
Whenever the BIOS detects a non -fatal error, the system will stop and you will
be prompted.
All, But Keyboard
The system boot will not be halted for a keyboard error; it will stop for all other
errors