User manual

IA70 Motherboard User Manual
6
Chapter 2 Installations
2.1 Memory Module（DIMM）Installation
IA70 motherboard supports one DDR2 memory socket for a maximum total memory
of 2GB in DDR2 memory type.
2.1.1 Installing and Removing Memory Modules
To install the DDR 2 modules, locate the memory slot on the board and perf orm the
following steps:
1. Hold the DDR2 module so that the key of the DDR 2 module align with those on
the memory slot.
2. Gently push the DDR 2 module in an upright position until the clips of the slot
close to hold the DDR 2 module in place when the DDR 2 module touches the
bottom of the slot.
3. To remove the DDR 2 module, press the clips with both hands.
DDR2 Module
Lock Lock
Lock Lock