IA70 Motherboard Mini-ITX Fan SBC w/ Intel®ATOM N270 1.6GHz Processor, VGA, LCD, Giga Ethernet, Mini-PCI and PCI Slot Interface. USER MANUAL Version 1.0 IMPORTANT NOTICE : The Euro CLS IA70 motherboard can be used for a large range of panel PC's from 8.4" to 42". In order to know the complete range of products we propose, please clic this link : http://www.eurocls.
FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions ： This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "a" digital device, pursuant to part 15 of the FCC rules.
Copyright Notice ALL RIGHTS RESERVED. No part of this documen t may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are tradem arks or registered trademarks of their respective owners.
Packing List Before using this Motherboard, please make sure that all the items listed bel ow are present in your package： IA70 Motherboard IA70 SBC User Manual HDD IDE Cable User’s Manual & Driver CD If any of these items are missing or damaged, contact your distributor or sales representative immediately. Customer Service We provide service guide for any problem as follo w steps：First, visit the website at to find the update information about the product.
Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronic personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Safety and Warranty 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Please read these safety instructions carefully. Please keep this user's manual for later reference. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. Keep this equipment away from humidity.
Revision History Version Date Note Author 0.8 2008.12.04 Initial Draft Aladin Huang 1.0 2008.12.
Contents CHAPTER 1 GENERAL INFORMATION ................................ .....1 1.1 INTRODUCTION ............................................................................ 1 1.2 1.3 1.4 FEATURE ..................................................................................... 1 MOTHERBOARD SPECIFICATIONS .................................................. 2 FUNCTION BLOCK ....................................................................... 3 1.5 BOARD DIMENSIONS ................................
CHAPTER General Information 1 This chapter includes IA70 Motherboard background information.
Chapter 1 1.1 General Information Introduction IA70 SBC is equipped with Intel 945GSE North Bridge and Intel ICH7M South Bridge which are designed for use with Intel’s mobile platform. Intel’s 945GSE platform delivers the performance and high scalability cutting -edge embedded computing application. In peripheral connectivity, IA70 SBC with one PCI slot, one PCI-E(x1) and Mini-PCI I/O ports, two SATA connectors, and eight Hi-Speed USB connectors.
1.3 Motherboard Specifications CPU Type CPU FSB CPU Socket Chipset BIOS VGA LVDS LAN Memory Type LPC I/O Keyboard/Mouse IDE Interface Sound USB Edge Connectors On Board Pin-Header Connectors Power Connector Expansion Slots Form Factor Dimensions Mechanical & environmental Intel® Atom N270 1.
1.4 Function Block ATOM N270 1.6GHz Processor Atom N270 1.6GHz FSB 400 1600*1200 18bit/Dual CH CRT Intel 945GSE LVDS DIMM x 1 DDR2 533/400 Max.2GB 66MHz Hub Interface 1.
1.
CHAPTER Installations 2 This chapter provides information on how to use the jumps and connectors on IA70 Motherboard.
Chapter 2 Installations 2.1 Memory Module（DIMM）Installation IA70 motherboard supports one DDR2 memory socket for a maximum total memory of 2GB in DDR2 memory type. 2.1.1 Installing and Removing Memory Modules To install the DDR2 modules, locate the memory slot on the board and perf orm the following steps: 1. Hold the DDR2 module so that the key of the DDR 2 module align with those on the memory slot. 2.
2.2 I/O Equipment Installation 2.2.1 12V DC-IN The Motherboard allows plugging 12V DC-IN jack on the board without another power module converter under powered consumption by Intel Atom N270 1.6GHz processor. 2.2.2 PS/2 Keyboard and PS/2 Mouse The Motherboard provides two PS/2 interface. The PS/2 connector supports Keyboard and Mouse. In other cases, especially in embedded applications, a mouse is not used.
2.2.7 Audio Jack ( Pin-header) The Audio 5.1 channel capabilities are provided by a Realtek ALC655 chipset supporting digital audio outputs. The audio interface includes Mic-in,: line-in and line-out.
2.
2.4 Jumper Setting A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware config uration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting diagram is shown as the right one.
2.4.1 JP1: Clear CMOS User must make sure the power supply to turn off the power supply before setting Clear CMOS. Users remember to setting jumper back to Normal before turning on the power supply. Default: 2 short 3. Clear CMOS Normal 1 1 2 2 3 3 Pin No. 1 Short 2 2 Short 3 Functions Clear CMOS Normal JP4 : COM1 RS232 / RS422 / RS485 Function Selector The jumper can be configu red to operate COM1 in RS-232/422/485 mode. And the setting must be cooperated with the 2.4.2 settings.
2.4.4 CON5: LCD Panel Voltage Select CON5 can be configured to operate in 3.3Volts / 5Volts / 12Volts mode. 3.3Volts 5Volts 12Volts 1 2 1 2 1 2 3 4 3 4 3 4 5 6 5 6 5 6 IA70 Motherboard User Manual Pin No. 1 Short 2 3 Short 4 5 Short 6 12 Functions 3.
2.5 Connectors and Pin Assignment The table below lists the function of each of the board’s connectors. Label Function Note CON3 DF13-40DP-1.25V 3x1 header, pitch 2.54mm CON4 LVDS LCD Output Connector Digital Panel Backlight Brightness Control Inverter Connecter PSKBM1 PS2 Keyboard/Mouse Connector PS/2 Conn. CON2 D-SUB Dual COM1/VGA Output 9pin COM/ 15pin VGA CON7 Serial port COM2 9pin COM port CON8 D-SUB Dual Serial Port COM3, COM4 9pin COM port IDE1 IDE Connector 44Pin IDE Conn.
2.5.1 CON3: LVDS Connector Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 SYMBOL LCDVDD LCDVDD LCDVDD GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 SYMBOL LVDS_LTX0LVDS_LTX0+ LVDS_LTX1LVDS_LTX1+ LVDS_LTX2LVDS_LTX2+ LVDS_LCLKLCDS_LCLK NC NC LVDS_UTX0LVDS_UTX0+ LVDS_UTX1LVDS_UTX1+ LVDS_UTX2LVDS_UTX2+ LVDS_UCLKLVDS_UCLK NC NC 2.5.2 JP3: Digital Panel Backlight Brightness Control Pin No.
2.5.3 CON4: Digital Panel Backlight Control Pin No. 1 2 3 4 5 6 7 SYMBOL +12V +12V +12V GND Black Light Control GND Black Light EN 5V 2.5.4 PSKBM1: PS2 Keyboard/Mouse Connector Pin No. 1 2 3 4 5 6 PS/2 Keyboard SYMBOL KDATA NC Ground VCC KCLK NC IA70 Motherboard User Manual Pin No.
2.5.5 CON2: D-SUB Dual Output The serial port COM1 is option series port for RS232 / RS422 / RS485. It is for industrial application. C1 Up: 9(Male) C6 V1 Down: 15(Female) V6 V11 Pin No. C1 C2 C3 C4 C5 C6 C7 C8 C9 SYMBOL DCD4/485TXRXSRD4/485TXRX+ STD4/422RX+ DTR4/422RXGND NDSRA NRTSA NCTSA NRIA Pin No. V1 V2 V3 V4 V5 V6 V7 V8 V9 V10 V11 V12 V13 V14 V15 SYMBOL R G B NA GND GND GND GND VCC GND NA DAC_SDAT0 3VHSYNC0 3VVSYNC0 DAC_SCL0 2.5.
2.5.7 CON8: D-SUB Dual Serial Port The serial port COM3/4, RS232 only, from A1 to A9 is COM3, and B1 to B9 is COM4, which is supported by Fintek. B1 B6 A1 A6 Pin No. A1 A2 A3 A4 A5 A6 A7 A8 A9 SYMBOL FK_NDCD1 FK_NSIN1 FK_NSOUT1 FK_NDTR1 GND FK_NDSR1 FK_NRTS1 FK_NCTS1 FK_NRI1 Pin No. B1 B2 B3 B4 B5 B6 B7 B8 B9 SYMBOL FK_NDCD2 FK_NSIN2 FK_NSOUT2 FK_NDTR2 GND FK_NDSR2 FK_NRTS2 FK_NCTS2 FK_NRI2 2.5.
2.5.9 IDE1: 44 pins IDE Connector 1 2 44 IA70 Motherboard User Manual Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 SYMBOL RESET DD7 DD6 DD5 DD4 DD3 DD2 DD1 DD0 GND1 DREQ DIOW# DIOR# IO_RDYD DACK# IRQ DA1 DA0 DCS#1 DASP# +5V1 GND 18 Pin No.
2.5.10 USB1/2: USB PIN HEADER 2 1 4 3 6 5 8 7 Pin 2 4 6 8 USB1/2 SYMBOL Pin USBVCC 1 USB_P63 USB_P6+ 5 GND 7 SYMBOL USBVCC USB_P7USB_P7+ GND 2.5.11 NB_FAN1/CPU_FAN1: FAN CONNECTOR NB_FAN CPU_FAN 2.5.12 PANEL1: Front Panel System Function Connector 2 4 6 8 10 Pin 2 4 6 8 10 1 3 5 7 9 SYMBOL HD_LED+ HD_LEDRT_BT1 RT_BT2 5VSB Pin 1 3 5 7 9 2.5.
2.5.14 CON10/CON11/J4: External Power CON10 CON11 J4 2.5.15 PWIN1: DC Jack 2.5.16 ATX12V1: 12V DC Connector Pin 1 2 3 4 SYMBOL Ground Ground +12V +12V 2.5.
CHAPTER 3 Graphic Driver Installation This chapter offers information on the chipset software Installation utility Installation of Graphic Driver Panel Resolution Setting IA70 Motherboard User Manual 21
Chapter 3 Graphic Driver Installation 3.1 Standard CMOS Feature IA70 Motherboard is equipped with Intel 945GS E / ICH7M Companion Device. The Intel Graphic Drivers should be installed first, and it will enable “Video Controller (VGA compatible). Follow the instructions below to complete the installation. You will quickly complete the installation. Step.1. Insert the CD that comes with the Motherboard. Open the file document “Graphic Driver “. Step.2. Click on “win2K_xp1429” to execute the setup.
Step.3. Click on “Next “ to install Driver. Step.4. Click on “Next “ to install Driver.
Step.5. Click on “Yes “ to agree License. Step.6. Click on “Next “ to install Driver.
Step.6. Click on “Next “ to install Driver. Step.7. Click on “Yes, I want to restart this computer now “ to go on.
3.2 Panel Resolution Setting Step.1. Right-click the desktop, and then click Properties. Step.2. In the Display Properties dialog box, click the Settings tab. Step.3. Click on “Monitor”.
Step.4. Click on “Hide modes that this monitor cannot display ” to remove this option. Step.5. Click on “Setting”, then could choose 32bit color qualify.
CHAPTER 4 Chipset Driver Installation This chapter offers information on the chipset softw are Installation utility Installation of Chipset Driver Further information IA70 Motherboard User Manual 28
Chapter 4 4.1 Chipset Driver Installation Standard CMOS Features Setp.1. Insert the CD that comes with the motherboard. Open the file document “Chipset Driver”. Setp.2. Click on “infinst_auto.exe“ to install driver.
Setp.3. Click on “Next“ to install driver. Setp.4.
Setp.5. Click on “Next“ to install driver. Setp.6. Click on “Next“ to install driver.
Step.7. Click on “Yes, I want to restart this computer now “ to go on.
CHAPTER 5 Ethernet Driver Installation This chapter offers information on the Ethernet software installation utility.
Chapter 5 Ethernet Driver Installation 5.1 Introduction IA70 Motherboard is equipped with the Realtek RTL8111 B Gigabit Ethernet controller combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, PCI Express bus controller, and embedded memory. With state-of-the-art DSP technology and mixed -mode signal technology, it offers high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable.
5.1 Installation of Ethernet Driver The Users must make sure which operating system you are usi ng in the IA70 Motherboard before installing the Ethernet drivers. Follow the steps below to complete the installation of the Realtek RTL8111B LAN drivers. You will quickly complete the installation. Step.1. Insert the CD that comes with the moth erboard. Open the file document “LAN Driver”. Step.2 Click on “Setup” to execute the setup.
Step.3. Click on “Next“ to install driver. Step.3. Click on “Install“ to install driver.
Setp.3. Click on “Finish“ and go on.
CHAPTER 6 Audio Driver Installation This chapter offers information on the Audio software installation utility.
Chapter 6 6.1 Audio Driver Installation Introduction The IA70 Motherboard is equipped with the ALC655 is a 16-bit, full-duplex AC'97 Rev. 2.3 compatible six-channel audio CODEC designed for PC multimedia systems, including host/soft audio and AMR/CNR -based designs..
Step.2. Click on “Next“ to install driver. Step.3. Click on “Yes, I want to restart my computer now ” to finish installation.
This chapter describes how to set BIOS configuration IA70 Motherboard User Manual 41 CHAPTER AMI BIOS Setup 7
Chapter 7 7.1 AMI BIOS SETUP Starting Setup Your computer comes with a hardware configuration program called BIOS Setup that allows you to view and set system parameters. The BIOS (Basic Input / Output System) is a layer of software, called ‘firmware’, that translates instructions from software (such as the operating system) into instructions that the computer hardware can understand. The BIOS settings also identify installed devices and establish special fe atures.
options that can be configured. Grayed -out options cannot be configured; options in blue can be. The right frame displays the key l eg- end. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. 7.2 System Overview Use this option to change the system time and date. Highlight System Time or System Date using the keys. Enter new values through the keyboard.
7.3 Advanced Setting CPU Configuration Press “Enter” to CPU Configuration setting. CPU configuration differs from writing an executable program. It is equivalent to setting dip switches or jumpers on a circuit board.
to change this configuration. IDE/SATA Configuration IDE Channel IO Master While entering setup, the BIOS automatically detects the presence of IDE devices. This displays the status of IDE device auto -detection.
IDE Channel IO Slave While entering setup, the BIOS automatically detects the presence of IDE devices. This displays the status of IDE device auto -detection. Type Select the type of IDE drive. Setting to Auto allows automatic selection of the appropriate IDE device type. Select CDROM if yo u are specifically configuring a CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device either is ZIP, LS-120, or MO drive. The options: [Not Installed], [Auto], [CD/ DVD], [ARMD].
Block (Multi-Sector Transfer) Controls enabling of multi-sector transfer, if supported. The options: [Disabled],[Auto]. PIO Mode Indicates the type of PIO (Prog rammed Input/Output).
DMA Mode Indicate the type of Ultra DMA. The options: [Auto], [SWDMan], [MWDMAn], [UDMAn]. S.M.A.R.T This allows you to activate the S.M.A.R.T.
Technology) capability for the hard disks. S. M.A.R.T is a utility that monitors your disk status to predict hard disk failure. This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline. 32Bit Data Transfer Enable 32-bit communication between CPU and IDE card. The options: [Enabled], [Disabled].
Super IO Configuration Serial Port 1 Address Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/ IRQ3].
Serial Port 2 Address Allows you to select the Serial Port2 base address. The options: [Disabled], [3F8/IRQ4], [2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3]. Serial Port 3 Address Allows you to select the Serial Port3 base address. The options: [Disabled], [3E 8], [2E8]. Serial Port 3 IRQ Allow BIOS to select Serial Port 3 IRQ.
Serial Port 4 Address Allows you to select the Serial Port4 base address. The options: [Disabled], [3E8], [2E8]. Serial Port 4 IRQ Allow BIOS to select Serial Port 4 IRQ. The options: [3], [9], [10], [11].
Hardware Health Configuration CPU Temperature The onboard hardware monitor automatically detects and displays the CPU temperatures. Select [Disable] if you do not wish to display the detecte d temperatures.
ACPI Configuration General ACPI Configuration IA70 Motherboard User Manual 54
Suspend Mode This item specifies the power saving modes for ACPI function. If your operating system supports ACPI, you can choose to enter the Standby mode in S1 (POS) or S3 (STR) fashion through the setting of this field. These options: [S1 (POS)] The S1 sleep mode is a low power state. In this state, no system context is lost (CPU or chipset) and hardware maintains all system contexts.
open applications/files is saved to main memory that remains powered while most other hardware components turn off to save energy. The information stored in memory will be used to restore the system when a "wake up” event occurs. Repost Video on S3 Resume Determine whether to invoke VGA BIOS post on S3/STR resume. The options: [No], [Yes]. ACPI Version Features Allows adding more tables for Advanced Configuration and Power Interface (ACPI) 2.0 specifications. The options: [ACPI V1.0], [ACPI V2.
ACPI APIC Support Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Application -Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI APCI table pointer is included in the RSDT pointer list. The options: [Disabled], [Enabled].
Legacy USB Support Allows you to enable or disable support for USB devices on legacy operating system (OS). Setting to Auto allows the sy stem to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. The options: [Disabled], [Enabled], [Auto].USB 2.0 Controller Allows you to enable or disable the USB 2.0 controller. The options: [Disabled] [Enabled]. USB 2.
Allows you to configure the USB 2.0 controller in [HiSpeed (480 Mbps)] or [Full Speed (12 Mbps)]. The options: [FullSpeed], [HiSpeed]. BIOS EHCI Hand-Off Allows you enable support for operating systems without an EHCI hand -off feature. The options: [Disabled], [Enabled].
7.4 PCI/PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/ PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices Clear NVRAM Clear NVRAM during system boot. The options: [No], [Yes]. Plug & Play O/S When set to [No], BIOS configures all the d evices in the system.
[Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. The options: [No] [Yes]. PCI Latency Timer Allows you to select the value in uni ts of PCI clocks for the PCI device latency timer register. The options: [32] [64] [96] [128] [160] [192] [224] [248].
IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested. The options: [No] [Yes]. Palette Snooping When set to [Enabled], the palette snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. The options: [Disabled] [Enabled].
device. The options: [Disabled], [Enabled]. OffBoard PCI/ISA IDE Card Allows you to set the PCI slot number. The options: [Auto], [PCI Slot1], [PCI Slot2], [PCI Slot 3], [PCI Slot4], [PCI Slot5], [PCI Slot6]. IRQ3,4,5,7,9,10,11,14,15 Allows you to specify IRQ that is available to be used by PCI/PnP or Legacy ISA device. The options: [Available], [Reserved].
DMA Channel 0,1,3,5,6,7 DMA Channel PCI/PMP functions. The options: [Available], [Reserved]. Reserved Memory Size Set the size of memory block to reserve for legacy ISA devices. The options: [Disabled], [16 K], [32 K], [64 K].
IA70 Motherboard User Manual 65
7.5 Boot Boot Setting Configuration Quick Boot Enable this item allows the BIOS to skip some power on self test (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. The options: [Disabled], [Enabled].
Quiet Boot Allows you to display Normal POST message or OEM logo. The options: [Disabled], [Enabled]. Boot up Num-Lock Allows you to select the power -on state for the NumLock. The options: [Off], [On]. Wait for ‘F1’ If Error When set to Enabled, the syst em waits for the F1 key to be pressed when error occurs. The options: [Disabled], [Enabled].
Boot Device Priority Boot Device Priority Select the priority of Boot devices.
IA70 Motherboard User Manual 69
7.6 Security Select Security Setup from the IA70 Setup main BIOS setup men u. All Security Setup options, such as password protection and virus protec - tion are described in this section. To access the sub menu for the follow ing items, select the item and press : ï Change Supervisor Password ï Boot sector Virus protection: The boot sector virus protection will warn if any program tries to write to the boot sector.
7.7 Chipset DVMT model select This function displays the active system memory mode. DVMT / FIXED Memory Specify the amount of DVMT / FIXED system memo ry to allocate for video memory.
Boot display device Select boot display device at post stage . You could select Auto/VGA/LVDS only/LVDS+VGA.
7.8 Exit This Exit menu items allow you to load the optimal or f ailsafe default value for the BIOS items, and save or discard your changes to the BIOS items. Discard Changes and Exit Select this option only if you do not want to save the changes that you made to the setup program. If you made changes to fields other than System Date, System time, and Password, the BIOS asks for a confirmation before exiting.
Discard Changes This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears. Select [OK] to discard any changes and load the previously saved values. Load Optimal Defaults This option allows you to load the optimal default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select [OK] to load optimal default values.
Load Failsafe Defaults This option allows you to load the failsafe def ault values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select [OK] to load failsafe default values.
Note1: Digital I/O Sample Code //File of the Main.cpp //=========================================================== //This code is for test I570 Super I/O. //===================================== ====================== #include #include #include #include
// = 1 -> GPIO1. ucBuf = Get_W83627EHG_Reg(0x29); Set_W83627EHG_Reg(0x29,ucBuf|0x01); // Bit0 = 0 -> GPIO1 is inactive. // Bit1 = 1 -> Activate GPIO1.
} //--------------------------------------------------------------------------void Unlock_W83627EHG (void) { outportb(W83627EHG_INDEX_PORT, W83627EHG_UNLOCK); outportb(W83627EHG_INDEX_PORT, W83627EHG_UNLOCK); } //===================================== ======================= void Lock_W83627EHG (void) { outportb(W83627EHG_INDEX_P ORT, W83627EHG_LOCK); } //===================================== ======================= void Set_W83627EHG_Reg( unsigned char REG, unsigned char DATA) { Unlock_W83627EHG(); outportb
Note2: Watchdog Sample Code //File of the Watchdog.cpp //============================================================ //This Sample code is for Watchdog ti mer configuration //============================================================ //============================================================ #include #include #include #include
} Set_W83627_Reg(0x07,0x08);//switch to logic device 8 Set_W83627_Reg(0x30,0x01);//Activate watchdog Set_W83627_Reg(0xF5,0x06);//Select WDTO# count mode.Second Mode.
Set_W83627_Reg(0xF6,0); //Disable Watchdog timer return 0; } //--------------------------------------------------------------------------void Unlock_W83627 (void) { outportb(W83627_INDEX_PORT, W83627_UNLOCK); outportb(W83627_INDEX_PORT, W83627_UNLOCK); } //============================================================ void Lock_W83627 (void) { outportb(W83627_INDEX_PORT, W83627_LOCK); } //============================================================ void Set_W83627_Reg( unsigned char REG, unsigned char DATA
Note3: There is some problem when install software in CF Card as following condition: 1. Master: IDE CD-ROM ( PIONEER DVD-227A ) Slave: CF Card ( Transcend 120X -standard ) CF Card is not founded. 2. Master: CF Card ( InnoDisk ) Slave: IDE CD-ROM ( Plextor PX-760A) CD-ROM is not founded. 3. Master: CF Card ( InnoDisk ) Slave: IDE CD-ROM ( PIONEER ) CF Card is not founded. 4. Master: CF Card ( Transcend 120X -standard ) Slave: IDE CD-ROM ( Plextor PX-760A ) CD-ROM is not founded. 5.
