cooking USAGE AND CARE GUIDE PRODUCT CODE: EV90DFSX EV900DPSX
WHEN YOU CALL FOR SERVICE When you call for service or order parts for your unit, be sure to give: 1. MODEL 2. SERIAL NUMBER 3. COLOUR 4. PART NAME and/or description of problem 5. YOUR FULL NAME, ADDRESS, and HOME TELEPHONE NUMBER and BUSINESS TELEPHONE NUMBER IF APPROPRIATE. Servicing shall be carried out only by authorised personnel.
Note: Fitting the adjustable feet ( Fig.1 ). tilting. Both chains must be securely fixed. Make sure that the wall surface behind the Cooker is noncombustable (will not catch fire). Where a painted surface is adjacent, a fire retardent paint surface is recommended. Wallpaper, wood, or fabric should not be used behind or next to the cooker. Beforehand: • Remove all parts that are not permanently fixed, especially the pan su p ports and burners. • Remove the accessor ies from the oven.
Instruction assembly crossbar reinforced legs 1. Recline the cooker on the back as (This must be done by two operators) 2. Remove two screws from the front frame. 3. 4. 5. Take the two reinforcement bars from the box positioned inside the cavity of the oven Place the two reinforcement bars as the image (The two reinforcement bars are ambidextrous) Fix the two reinforcement bars with the screws provided (4 screws each reinforcement bars) 6. 7.
VERY IMPORTANT FOR THE INSTALLER Do not attempt to turn or stress threaded elbow of the manifold: you risk damage to this part of the gas appliance which may void the manufacturers warranty. GAS CONNECTION Gas installation must be made in accordance with AS/NZS 5601; Also refer to rangehood manufacturers recommendation. Check gas presure, note the correct setting from the data plate sealed inside the front appliance drawer *. Before Leaving - Check all connections for gas leaks with soap and water.
2nd SECTION FOR THE USER - change the injector (see Fig. D) and replace it with another one suitable for the new type of gas (see Tab. 1) WARNING: Children should be kept away while the oven or grill is in use since accessible parts become hot. Fig. D MINIMUM FLOW ADJUSTMENT FOR HOB-TOP TAPS In order to adjust the minimum flame setting proceed as follows: switch the burner on, and set the knob at the minimum position . .
Always use pans with a flat base diameter, which are well balanced and stable in use, a pan which overhangs the hotplate should not be used. Avoid using old, misshapen pans, or pans which are unstable when placed on a flat surface. Do not use "split pans" as they are inherently unstable. To save gas, always position pans centrally over the burners and adjust the flames so that they do not lick up the sides of the pan and only the base is heated.
HOW TO USE YOUR ELECTRIC OVEN Apply for model EV90DFSX - Before cooking in the first time we reccommend that the oven should be operated at 200° C for 30 minutes to remove any manufacturing greases and odours. - Do not place items or pan directly on to the oven botton. - Foil should only be used to cover food and not oven shelves or party of the oven. When used improperly will obstruct the air circulation causing problems in cooking and/or harmful accidents.
Light When you turn the control knob to this position, the light will be on for all the following operations. HOW TO USE YOUR ELECTRIC OVEN Apply for model EV900DPSX - Before cooking in the first time we reccommend that the oven should be operated at 200° C for 30 minutes to remove any manufacturing greases and odours. - Do not place items or pan directly on to the oven botton. - Foil should only be used to cover food and not oven shelves or party of the oven.
conventional oven, using one tray only. Cooking results are a matter of personal preference and may easily be adjusted to suit individual requirements by slight adjustment of the temperature and or cooking time. Preheating of the oven is recommended for 10-15 minutes or until the oven thermostat indicator light switches off to show the selected temperature has been reached.
USlNG THE GRILL “"Relay Operation Icon"”shows the working state of relays. The (APPLY FOR MODEL EV 900DPSX) The grill is situated in the top of the oven compartment. The grill pan should be located on the top oven shelf position. Always grill with the door closed. icon will keep lighting up if contact are connected, and will be off if contacts are disconnected. "Number Display"”is LED Nixie Tube.
For example: the present time is 2: 00, then the max. end time is adjusted to 12:00 (2: 00＋10：00＝12：00). When the end time is adjusted to 12:00, then the continuous time is 10:00. 5s after adjusted, automatic program is working. After 10 hours, if continuous time is counting down to 0, turn off the relay contact, and "Relay Operation Icon" is dark, "Auto-programming Icon"”flashes, the buzzer is buzzing. Note: 1. only use this setting for either continuous time or end time.
Using the rotisserie 3 Hook the other end int o the holderr. 3. 4. Pour a little bit of wate r into the baking tray and slide this into 4 (APPLY FOR MODEL EV 9 00DPSX) shelf pos ition 1 to collect the run-off fat. The rotisserie can be used to cook joints such as rolled joints and poultry with excellent results. The meat is roasted thoroughly and evenly. The rotisserie function only when the switch is in position grill.
Daily Regular wiping down directly after use prevents dirt from burning on. Clean the appliance with water and a detergent or all purpose cleaner. Avoid using too much water to prevent it entering the burner or ventilation openings. CLEANING Before cleaning the appliance, close the gas stopcock and unplug appliance or disconnect power at the main circuit breaker of the electrical system. Do not clean the appliance surfaces when still hot.
Cleaning the interior glass of the oven CAUTION: Do not use rough or abrasive materials or sharp metal scrapers to clean the glass doors of the oven since they may scratch the surface and cause the glass to break. The interior glass of the o ven door can be removed: with the door in the semi--open position, use both hands to remove the glass. After clea aning, refit the glass by proseeding i n reverse order. Note In some models, the glas s is screenprinted.
GREASING OF TAPS If a tap becomes hard to be turned, grease it using a specific grease withstanding high temperatures. Act as follows: open the work-top and disassemble also the control panel as described on the previous paragraph. Unscrew the two fixing screws from the burner body (see picture) and remove the cone.
PROBLEM SOLVER SOME SAFETY POINT Any of the following are considered to be abnormal operation and may require servicing: Yellow tipping of the hob burner flame. Sooting up of cooking utensils. Burners not igniting properly. Burners failing to remain alight. Burners extinguished by oven door. Gas valves, which are difficult to turn. Do not use the appliance as a space heater. If you smell gas Open a window. Do not use any electrical switches. Immediately extinguish naked flames.
OVEN DOES NOT WORK AT ALL First, when the oven is equipped with timer, check appliance is not programmed to turn on later. If it is, turn to manual setting (i.e. hand symbol). If the button or scale on the timer remains in the automatic position after use, the power supply to the oven will be interrupted. Also, check your appliance is switched on at the mains. Next check for an unexpected power strike by switching on adjacent lights etc. Finally, check fuses and plug wiring.
Maintenance schedule: To ensure the appliance continues to operate at peak performance, we recommend a routine service call years for the life of the appliance. FOR SPARE PARTS OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SPARE PARTS CENTRE IN AUSTRALIA Eurostyle rG oup Pty Ltd 65 lG ynburn Road lG ynde S.A. 50 70 Ph.
Pronto Service + Support: 1800 440 335 Email: service@eurostylegroup.com.au HEAD OFFICE 65 Glynburn Road, Glynde SA 5070 Ph: 08 8165 1012 www.euroappliances.com.
