Product Manual
GAS CYLINDER INFORMATION
1. This appliance is designed to be used with a gas cylinder not exceeding (Australia 9KG)
2. The gas cylinder supply valve must be turned off when the appliance is not in use.
3. Gas cylinders must be stored outdoors, out of reach of children and must not be stored in a building,
garage or any other enclosed area.
4. The gas cylinder used must incorporate a safety collar to protect the valve assembly.
5. Never store a spare cylinder under the barbecue shelves or inside the trolley housing. Any
6. LPG cylinder not attached to the BBQ for use should be stored outdoors and well away from this
appliance.
Important
When disconnecting and removing the gas cylinder for the purpose of refilling, always observe the
following procedure.
Ensure that all gas control valves on the appliance and the gas cylinder are turned off before
disconnecting the regulator from the cylinder.
Do not smoke or use a naked flame near the appliance or gas cylinder while disconnecting the gas line
between the appliance and gas cylinder.
Remove the gas cylinder from the enclosure before disconnecting the regulator from the appliance.
Tighten all connections before placing the gas cylinder back in its enclosure.
The gas leak testing procedure should be conducted every time the gas cylinder is refilled and
reconnected to the appliance before using the appliance.
Regulator Connection
Check that all control knobs are in the ‘Off’ position.
Make sure the cylinder valve is off.
Remove the protective cap from the cylinder if present.
Leak test the connection with a soapy water solution.