NEU1 0 series Upright vacuum cleaner; household type Owner’s Guide Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this owner’s guide. If you have questions about your new vacuum, please contact our customer service HELPLINE at 1-800-282-2886. :H·UH KHUH WR KHOS Eureka stands by our Clean Promise seal. Learn more at www.eureka.com/cleanpromise www.eureka.com www.eureka.
:KHUH WR ÀQG LPSRUWDQW YDFXXP LQIRUPDWLRQ .HHS WKLV LQIRUPDWLRQ Write the model, type and serial number here: Date of purchase (keep your receipt) ______________ Model number and type _________________________ Serial number ________________________________ Find these numbers on a label on the ORZHU back side of the vacuum cleaner. Refer to these numbers when ordering parts and accessories or if service is needed. 7KLV 2ZQHU·V *XLGH SURYLGHV LPSRUWDQW LQVWUXFWLRQV WR SURORQJ WKH OLIH RI \RXU (XUHND YDFXX
,03257$17 6$)(*8$5'6 When using an electrical appliance, basic precautions should always be followed, including the following: 5($' $// ,16758&7,216 %()25( 86,1* 7+,6 9$&880 &/($1(5 WARNING 7R UHGXFH WKH ULVN RI ÀUH HOHFWULF shock, or injury: • Do not use outdoors or on wet surfaces. • 'R QRW OHDYH YDFXXP FOHDQHU ZKHQ SOXJJHG LQ Turn off the switch and unplug the electrical cord when not in use and before servicing. • Do not allow to be used as a toy.
How to identify parts of your vacuum cleaner 1 2 10 6 5 11 4 7 3 12 13 14 8 17 9 15 16 20 19 18 1. Handle 2. Detachable Extension Wand 3. CreviceTool 4. Dusting Brush 5. Carrying Handle 6. Dust Cup Release Button 7. Accessory Holder 8. Dust Cup 9. Dust Cup Empty Button 10. Cord Hook 11. Extension Wand Release 12. Hose hook 13. Stretch Hose 14. Upper Cord Wrap 15. Power Cord 16. Handle Recline Pedal 17. Power Switch Pedal 18. Product Rating Label and Serial Number 19. Hose Holder 20.
How to assemble your vacuum cleaner Please Note: Always remove the plug from the power socket before DWWDFKLQJ or removing accessories. Ensure all ILOWHUV are fitted, and fitted correctly before using. WARNING: DO NOT plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operation procedures. Insert the handle into the base and push until you hear it click and lock into place.
Operation Twist the to release the power and plug in your vacuum. 1 Step on the power switch pedal Press the handle recline pedal and pull back on handle, to with your foot to place your engage for operation. vacuum in one of three positions. 2 3 1. Upright - For storage and transporting. 2. Normal Cleaning - Press handle recline pedal once. Use for most household floor cleaning tasks. 3. Low Cleaning - With the vacuum in normal cleaning position, press handle recline pedal again.
How to use your vacuum cleaner Using Accessories Remove hose handle from the hose holder. You can insert the crevice tool or dusting brush into the hose handle. Using the Detachable Extension Wand Remove hose handle from the hose holder. Remove the handle from the body of the vacuum by pressing the extension wand release and pulling up on the handle. Place the hose handle into the handle port and turn counter-clockwise until locked in place.
Maintenance And Care - Emptying And Cleaning Dust Cup WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Emptying and cleaning the dust cup Max. The dust cup needs to be emptied when dirt reaches the “Max” line. Press dust cup release button to remove the dust cup. Click! Hold dust cup over garbage bin and press the open button on the bottom of the cup, allowing the dust to empty.
Maintenance And Care - Cleaning Dust Cup Filter WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. 1. Open the dust cup filter lid, located on the top of the cup. 2. Remove the dust cup 3. Hand wash the foam foam filter. filter. 4.Allow filter to dry 24 hours before putting back into vacuum cleaner. Maintenance And Care - Cleaning Cyclone DO NOT operate without filter installed. DO NOT wash dust cup in the dishwasher. DO NOT install GDPS ILOWHU. 5.
Maintenance And Care - Replace Brush Roll WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner.
Maintenance And Care - Replace Drive Belt WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Check the drive belt carefully for wear, cuts and stressed areas. If the drive belt appears worn, you will need to replace it. To remove the drive belt, read the instructions and follow the drawings below: 1. Grasp the old drive belt and remove from motor shaft. Discard old drive belt. 2.
Problem solving WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting to the vacuum cleaner. Vacuum cleaner won’t run: Possible causes 1. Vacuum cleaner is not plugged in 2. Blown fuse/tripped breaker Remedies 1. Check electrical plug 2. Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt: Possible causes 1. Dust cup is full 2. Filter dirty 3. Hose not secure Remedies 1.
7KH (XUHND RQH \HDU OLPLWHG ZDUUDQW\ Midea America Corp. (“Eureka”), subject to the terms and conditions herein, warrants this vacuum cleaner to be free from defects in material and workmanship for a term of RQH year from the date of original purchase when used in accordance with the Eureka operating and maintenance instructions and under normal household usage.
NEU1 0 series Upright vacuum cleaner; household type Owner’s Guide Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this owner’s guide. If you have questions about your new vacuum, please contact our customer service HELPLINE at 1-800-282-2886. :H·UH KHUH WR KHOS Eureka stands by our Clean Promise seal. Learn more at www.eureka.com/cleanpromise www.eureka.com www.eureka.
