User Guide

7
1. Remove dust cup.
2. Pull dust cup fi lter out of dust cup.
3. Shake and brush the dust and dirt from fi lter.
4. If desired, launder the fi lter by hand in warm
water using a mild detergent.
NOTE: The dust cup fi lter is not dishwasher
safe. Do not put in diswasher.
5. Air dry thoroughly.
6. Replace fi lter in dust cup by pushing the seal
located at the top in fi rmly to ensure proper fi lter
performance.
Clean Dust Cup Filter
NOTE
: Turn off the power switch and unplug the electrical cord to service.
Clean the dust cup fi lter as necessary.
Replace a dirty or torn fi lter. Order additional dust cup fi lters from The Eureka
Company, Bloomington, IL 61701. Order dust cup fi lter, part number 61544
.
To
place an order please telephone [phone].
Clean Brush Roll (on some models)
NOTE
: Turn off the power switch and unplug the electrical cord to service.
The brush roll turns to sweep and comb the carpet nap. Keep the brush roll free from
hair and threads so it will continue cleaning. When the bristles of the brush roll no longer
touch a piece of cardboard held across the bottom plate, the brush roll is ineffective
because the bristles no longer touch the carpet nap. To maintain the most effective
cleaning, install a new brush roll.