Specifications

COVER REMOVED
Mirror Retractor
Lamp/Lightfield Adjustment Longitudinal Adjustment
CROSS ALIGNMENT LONGITUDINAL ALIGNMENT
1. Adjust two #6-32 screws for light-field 1. Slightly loosen the two #6-32
alignment screws
2. (Option) Add Loctite to set in postion 2. Position lamp bracket laterally for
light-field alignment, left to right
3. Tighten the two #6-32 screws
FIGURE 4.2 - LIGHT-FIELD ADJUSTMENT
WARNING! THE LAMP AND HEAT DEFLECTORS MAY BE HOT ENOUGH TO CAUSE
SEVERE BURNS. DO NOT TOUCH ANY OBJECT IN THE LAMP AREA WITH BARE SKIN.
WARNING! THE INTENSITY OF LIGHT OUTPUT IS SUFFICIENT TO TEMPORARILY
IMPAIR YOUR VISION IF ALLOWED TO ENTER THE EYES DIRECTLY. MAINTAIN A
POSITION IN WHICH YOU CAN SEE NEITHER THE FILAMENT WHEN IT IS OFF, NOR
ALLOW LIGHT TO DIRECTLY ENTER YOUR FIELD OF VISION WHEN IT IS ON.
CAUTION: BOTH CROSS AND LONG SHUTTERS MUST BE FULLY OPEN FOR ANY
MIRROR RETRACTION - FORCING THE MIRROR WILL MISCALIBRATE THE LIGHT-
FIELD!
November 2005 ( 4 – 6 ) Linear MC150-C Collimator