Instructions

21
transition directly to the tracking mode, this transition will take up to 40
seconds, during which time the display will flash “Searching”.
Monitoring Multiple Pets
The Marco Polo system can monitor up to three pets at one time. To do this
you simply repeat the process of placing each tag into monitor mode one at a
time by pressing the Pet button twice for each tag to be monitored.
When more than one tag is being monitored, the locator’s display switches
between displaying the information for each tag at about a 7 second rate. The
mode box indicates which tag’s information is being displayed. Figure 16
shows how the display might look when three tags are being monitored. First
the locator will display the information for Pet 1 for 7 seconds then Pet 2, Pet 3
and back to Pet 1.
If a boundary alarm occurs for any pet the Alarm notification will stay on for
that pet regardless of which pet’s information is being displayed at the moment.
Figure 17 shows an example of a display where Pets 1 and 2 have boundary
alarms and the display is currently showing the status of Pet 3.
Status of Pet 1
Status of Pet 2
Figure 16
Monitoring 3 Pets
7 sec