Instructions

20
In monitor mode three things are different from tracking mode:
1. The locator only communicates with the tag once every 40 seconds
rather than once every 5 seconds.
2. The direction information is not calculated or displayed by the locator.
3. The received signal strength from the tag is compared to the boundary
you selected and an alarm is issued if the pet moves outside of that
boundary. The alarm may be:
a. Beeping only (On Mode)
b. Beeping plus remote alarm activation (Remote Mode)
c. Silent alarm. (Off Mode)
To turn the audible alarm off press and hold the Down Arrow button for 2
seconds. Each time you do this the locator will toggle between silent and
normal mode.
If the monitored pet strays outside the selected boundary area and stays there
for 80 seconds or more then the Alarm will be activated on the locator. The
alarm display will appear as shown in Figure 15.
If the pet moves back into the boundary area the alarm will cancel
automatically. If you wish to cancel monitor mode, press the Pet button once
to clear the display and return to idle mode. If you wish to track the wandering
pet then press the pet button twice until “Track” flashes and the locator will
Figure 15
Monitor Mode
Pet 1 Outside Boundary Area