Instructions

10
This searching transmission will continue until one of these events has
occurred:
1. The tag responds
2. The operation is canceled as described below
3. Two minutes have elapsed without a response from the tag
The first time you attempt to search for your pet’s tag do so with the pet nearby,
somewhere in your house or yard where you know the signal will be received.
This way you can practice with the locator and know what to expect if an
emergency arises. Normally, the tag will respond to the searching signal within
30 seconds but in some cases it can take up to a minute. If your pet’s tag does
not respond within a minute then make certain it is turned on and review the
information on “Pairing a Tag and Locator” above if necessary. If the
searching operation times out after two minutes the locator will begin beeping,
the Searching icon will disappear and the display will show “No Signal”.
Pressing the select button again will restart the search operation for another 2
minutes. Once the tag does respond, the locator will beep and the display will
appear as shown in Figure 8.
If you wish to cancel a searching operation then press the Pet button twice until
both Track and Monitor disappear from the display.
Flashing
Figure 7
Searching for Tag 1