Instructions

9
for each pet, see the section on Monitoring Setups. To test if sounds are turned
on, press the Select button and listen for the beep tone.
Tracking a Pet
Searching
Once your Marco Polo tag is turned on and placed on the pet’s collar you may
track their whereabouts at any time. To do this, simply turn the locator on and
press the Pet button over the name of the pet you wish to track. When you do
this the Track icon will begin to flash as shown in Figure 6.
Once the Track icon is flashing you can either start the search process
immediately by pressing the Select button or you can simply wait 5 seconds
and the locator will enter track mode automatically. The first thing the locator
does in tracking mode is send out a signal to get the tag’s attention, a process
called “searching”. Figure 7 shows the appearance of the display in searching
mode.
Figure 6
Starting Track Mode
(Pet 1 Shown as an Example)
Flashing