Data Sheet

14
Monitoring Setups
The Marco Polo system allows you to select individual boundaries for up to three
tags as well as select the type of notification you will receive when the tag is
taken outside of that boundary area. To enter the Setup mode turn the locator on
and then press and hold the Select button until Setup begins flashing on the
display as shown in Figure 10. Press select again to enter setup mode.
The 3 mode boxes will now flash prompting you to press the Tag button you
wish to set up. Press Tag button 1, 2 or 3 to continue. The display will now flash
the last stored setting (or factory default) for the alarm mode as shown in Figure
11.
Flashing
Figure 10
Starting Setup Mode
Flashing
Figure 11
Setting Alarm Mode for Tag 1