Data Sheet

19
If a boundary alarm occurs for any tag the Alarm notification will stay on for that
tag regardless of which tag’s information is being displayed at the moment.
Figure 17 shows an example of a display where Tags 1 and 2 have boundary
alarms and the display is currently showing the status of Tag 3.
Switching Between Modes
You can transition a tag directly from one mode to another by pressing its Tag
button until the mode you want (Track, Monitor or Idle) is indicated and then
press select. You may cycle through the available modes as many times as you
want as long as you press the Tag button at least once every 5 seconds and don’t
press Select. Note that only one Tag may be tracked at one time so if you move a
Status of Tag 1
Status of Tag 2
Figure 16
Monitoring 3 Tags
7 sec
Figure 17
Monitoring 3 Tags
Tags 1 and 2 in Alarm