Instructions

19
Monitoring a Single Pet
To begin monitoring your pet and receive alarm notifications if they move
outside of your selected boundary area, press the Pet button over the pet’s
name twice. This will cause the word Monitor to flash. You can press Select to
start monitor mode immediately or simply wait 5 seconds and the locator will
enter monitor mode automatically. Once the monitor mode has been started the
display will appear as shown in Figure 13.
Monitor mode begins just like tracking mode by searching for the selected
pet’s tag. Once the searching operation is successful (10 to 30 seconds) the
display will appear as shown in Figure 14.
Figure 13
Starting Monitor Mode
Figure 14
Monitor Mode – Pet 1
Tag Icon Flashes
Every 7 Seconds
Flashing