Instructions

17
Press the Down Arrow button to cycle through the alarm mode selections:
On - When the pet is found outside of the designated area for 2
consecutive monitoring checks (40 to 80 seconds) an audible tone is
generated by the locator.
Remote – The audible tone is sounded as in the alarm “On” mode and
then after one additional monitoring check shows the pet is still outside
the designated area, the external alarm output is activated. Please
check eurekaproducts.com to see the available accessory devices that
can be used with this output.
Off - Only the ALARM indication is shown on the locator’s display.
No audible or external alarm is generated.
Once you have made your alarm mode selection, press the Select button, the
display will now show the last stored (or factory default) boundary selection as
shown in Figure 12.
Flashing
Figure 11
Setting Alarm Mode for Pet 1