Instructions

16
Monitoring a Pet
One of the most unique and powerful features of your Marco Polo system is
the ability to monitor your pets 24 hours a day to ensure that they have not left
your yard or other designated area. To get the most out of the monitoring
features of the system you will need to customize the settings for your
individual situation. After this is done you will not need to adjust the settings
unless you change locations or wish to alter the way Marco Polo notifies you
about a missing pet.
Monitoring Setups
The Marco Polo system allows you to select individual boundaries for up to
three different pets as well as select the type of notification you will receive
when the pet wanders outside of that boundary area. To enter the Setup mode
turn the locator on and then press and hold the Select button until Setup begins
flashing on the display as shown in Figure 10. Press select again to enter setup
mode.
The 3 mode boxes will now flash prompting you to press the Pet button you
wish to set up. Press Pet button 1, 2 or 3 to continue. The display will now
flash the last stored setting (or factory default) for the alarm mode as shown in
Figure 11.
Flashing
Figure 10
Starting Setup Mode