User Manual

13
EN
Zenith_E - Olympus_E
6.5.3 CONTINUOUS DISPENSING MODE ACTIVATION
Pressing with the filter holder the start grinding button (5) for more than 0.5 seconds, you
start dispensing in continuous mode.
During the continuous delivery you turn on both dose buttons (13)
and (14) and
shows the symbol (16)
on the display.
The last delivery to the start of the button pressing time grinding (5).
When you release the start grinding button (5), ending the continuous delivery and the
machine returns to the automatic mode of dose selection.
6.5.4 PARTIAL DOSE COUNTER ZEROING
By pressing both keys (11) and (12) for more than 5 seconds, both dose coun-
ters are reset (19-22).
6.5.5 FUNCTION BLOCK
Pressing both buttons (11) and (12) to their release, locks the adjustment of
the dose delivery time. Furthermore, display shows the symbol (20)
. Press again both
buttons (11)
and (12) to unlock.
6.5.6 APPLIANCE SWITCH ON WITH CONCEALED CONTENTS
If the key (13) is kept pressed, when switching the appliance on, a screen is entered
where the following data are displayed:
• Above, the firmware version;
• At the center, the display brightness index, adjustable with buttons (11)
and (12)
;
• Bottom left, the total counter of single doses dispensed (not resettable);