User Manual

12
EN
Zenith_E - Olympus_E
6.5.1 APPLIANCE SWITCH-ON
When switching the appliance on for the first time, it is configured in the mode
set by the factory and anyway, in the following uses, it will maintain the last
mode previous to switch off.
When switching the appliance on, the following screen is shown for 7.5 seconds.
6.5.2 DOSE DISPENSING AND SETTING (DISPLAY)
• By pressing the key for one dose (13) this lights up and the cup is filled (18) during
dispensing.
• Withasinglepress(rapid)ofthegrindingstartkey(5), dispensing the coffee and count-
down until zero are activated.
• Once dispensing is completed, the grinding time returns to set value.
• The single dose counter (19) is increased of 1.
• By pressing the key for two doses (14)
this lights up and the cup is filled (21) during
dispensing.
• Withasinglepress(rapid)ofthegrindingstartkey(5), dispensing the coffee and count-
down until zero are activated.
• Once dispensing is completed, the grinding time returns to set value.
• The double dose counter (22) is increased of 1.
• By pressing the increasing key (11)
and decreasing one (12) the dispensing
time of the selected dose is increased or decreased of more or less 5 hundredths of a
second.
• If the increasing key (11)
or decreasing one (12) is held down, the time is
increased or decreased by pressing time of the button.
You can stop the automatic dispensing before it is finished the grinding time.
During dispensing with the filter press the start button of the grinding (5) to
stop dispensing:
•PresstheStartbuttongrinding(5)toresumedeliveryfortheremainingtime;
•Press the dose button (blinking) to stop dispensing. The grinding time
returns to the set value.