Specifications

15) Using a 5/32“ hex driver and 1/4x20/3/8 button head screws (044-07236-00), install the back

covers on the braces.

16) Determine where the power strips (part#600-07223-00)) are going to be mounted on the rear

box beam, line up the slide nuts in the box beam to match the mounting holes of the power

strips, and use a ¼” hex driver with 5/16x18x0.375 socket head screws to mount the power

strips into the slide nuts.

17) Determine where the keyboard drawer (item 19, kbd drawer) is going to be located, then line up

the slide nuts in both box beams (the distance between the screw holes on each box beam end

of the keyboard drawer is xx”). Use a ¼” hex driver with 5/16x18x0.375 socket head screws to

mount the drawer into the slide nuts.