User`s manual

®
INC.
PACIFIC MICROSONICS
24
Setup & Operation
Model Two HDCD
®
User’s Manual
Rev. C - January 2002
Presets
The Model Two stores and recalls virtually all system setup parameters in labeled presets.
The preset use functions are shown below. For more information on using and storing
presets see pages 59, 63 and 64. Eighteen factory configured presets are installed.
Preset Function Menu Location
Recall Recall Presets(SETUP/PRESETS)
Store/Rename/Erase Store Presets(SETUP/MORE.../STORE_P)
The factory installed presets are: AD1X-24, AD1X-16, AD1X2416, AD+DD1X, DD1X-20, DD1X-
16, DD1X-2X, DD1X-4X, AD2X-24, DD2X-2X, DD2X-24, DD2X-16, DD2X-4X, AD4X-24, DD4X-
4X, DD4X-2X, DD4X-24, DD4X-16. The setup values stored in the factory presets are listed
below.
NOTE: The preset setup values shown below appear if the 44.1_X base sample rate is
selected. If the 48 X base sample rate is selected, the setup values remain the same,
except multiples of 48 appear in place of multiples of 44.1.
Factory Preset Configurations
NOTE: The following setup values are the same for all factory presets:
Menu/FUNCTION: VALUE:
Operating/MTRMODE NORMAL
Operating/MTRSRCE OUT_1 (44.1 kHz output)
OUTPUT (88.2/176.4 kHz output)
Second Operating/PEAKEXT OFF
Second Operating/LOWLVL OFF
Monitor Source FOLWMTR
Levels/AD_GAIN or DSPGAIN 0.0
Levels/MONLVL +18.0
Digital Output Phase Invert NORMAL
Digital Output HDCD Setup/PEAKEXT OFF
Digital Output HDCD Setup/LOWLVL OFF
Monitor Setup/PHASE NORMAL
Monitor Setup/HDCD AUTO
Monitor Setup/SCALING OFF
Meter Setup/PEAKHLD NONE
Meter Over #1/THRSHLD 1
Meter Over #1/HOLD OFF
Meter Over #2/THRSHLD 3
Meter Over #2/HOLD ON
Meter Setup/FINEREF -14