Specifications
11
System 5 Digital Audio Mixing System - InDepth
Inputs
Each channel has two digital inputs labelled A and B. Controls
for each input include:
• Gain Trim
• Phase Reverse
• Delay
• Input Select (A, B, or A+B)
Patching Input Sources
(PatchNet)
The PatchNet routing system (see page 28) is used to patch
sources to inputs. Any sources within the system, such as mix-
minus/group outputs or externals may be sent to these inputs.
External MADI inputs can also be directly patched. For Analog,
AES/EBU and other digital sources the Euphonix converters are
used. See the Converter section for details (page 32) .
Mic/Line Preamp
For variable gain analog mic in-
puts Euphonix provides the ML
530 with 24 mic/line input pre-
amps and the AM713 analog to
digital converter. If this is con-
nected to the system the controls
for phantom power, input imped-
ance, high pass filter and gain are
available on the channel strip.
This can also act as a direct box,
providing correct impedance
matching with balanced outputs
plus the benefit of gain control.
Impedance
High Z/Low Z
Phantom
In/Out
High Pass Filter
In/Out
Analog Mic/Line Gain
Gain Trim
Phase
In/Out
Delay (up to 2 secs)
In/Out
Input Switch: A, B, A&B
Input Function Selected
MIC LINE INTERFACE
ML
530
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
1
9
17
2
10
18
3
11
19
4
12
20
5
13
21
6
14
22
7
15
23
8
16
24 A1 A2 D1 D2
1-8
9-16
17-24
Trim
TRIM
96
48
44.1
CUSTOM
ANALOG TO MADI
AM
713
AES
WORD
INTERNAL
AUTO
SR
CONV
24 Microphones
ML530 Mic/Line
AM713 Analog to MADI
24 Analog Line Level
MADI to
StudioHub Router
TCC Control
Page to additional controls:
Input A, Input B, Processor In/Out
Analog Controls - ML 530 Mic/Line InterfaceDigital Controls - A Input shown
INPUTS
A Trim
(Digital)
Delay
A Phase
Phantom
Impedance
Hi-Pass
Analog Gain
Chan A In
(Digital)
A/B Select
B Trim
(Digital)
B Phase
Chan B In
(Digital)
A
B
Analog to Digital
Converter