Setup guide

Euphonix System 5 Post and Film Setup Guide
16
Figure 6 Internet Protocol (TCP/IP) Properties dialog
3. Click the Use The Following IP Address radio button and enter the IP address
according to the following:
Master - 10.0.0.1
Slave1 - 10.0.0.2
Slave2 - 10.0.0.3
The subnet mask is 255.255.255.0 for all three systems.
Leave the Default Gateway and DNS Server fields blank.
4. Click OK to close the Internet Protocol Properties.
5. Click on the Advanced tab at the top of the connection properties dialog.
Make sure Allow other network users to connect through this computer's
internet connection is checked in the Internet Connection Sharing section.