Specifications

-3.2-
3.2 OPERATING STATUS
The operating status is indicated by LEDs on the DCU. Table 3.2 shows red and orange
LED status during normal operation of the VDR. When the system detects an error, LEDs
on the PDU will show the details. See next page.
Table 3.2 Status code
SYS 1 SYS 2 SYS 3 DCU OK Description
YEL YEL YEL GRN This LED-indication is displayed when system is running o.k.
without any errors pending.
GRN GRN GRN GRN This LED-indication is displayed during saving of the
configuration to flash memory.
GRN RED RED GRN Indicates system is in IDLE-MODE.
RED RED GRN GRN Indicates system has been in IDLE and is now preparing to get
running.
RED OFF YEL GRN Indicates MIC-TEST passed on the selected MICROPHONES.
YEL RED GRN GRN Indicates VR-5000 is rebooting.
RED OFF OFF GRN Indicates only 1 Backup-slot left on multi-incident
BACKUPDRIVE.
OFF RED OFF GRN Indicates NO MORE ROOM on BACKUPDRIVE.
OFF OFF RED GRN Indicates Backup to BACKUPDRIVE is in progress.
YEL OFF OFF GRN Indicates we are no longer running on BATTERY-ONLY.
OFF YEL OFF GRN Indicates that IMAGE recovered from FRAMEGRABBER–error
(radar turned on again).
YEL GRN GRN GRN Indicates that connection was re-established to PDU.
OFF GRN GRN GRN Indicates that connection was re-established to RAP.
YEL RED RED GRN Indicates that SERIAL_TIMEOUT_ERROR recovered.
GRN RED GRN GRN Previous STORAGE-error recovered automatically.
GRN YEL RED GRN Indicates that VGA-STATUS_DISPLAY update is being
disabled.
RED RED YEL GRN Indicates system has received UTC information after a
PRC_UTC_TIMEOUT.
GRN RED OFF GRN Indicates that DEBUG-LEVEL for framegrabber has been reset
to ZERO.