Specifications

-1.8-

The green LED (right) on the panel is “Power” indicator and the amber one (left) is HD

access indicator.

HD access indicator

Front panel of removable hard disk

To remove the HD, carry out the following procedure.

.1 Press SAVE button (long press) on the RAP (Remote Alarm Panel). The yellow LED

starts blinking, showing that recording is being terminated.

.2 Wait until the LED comes on.

.3 Turn off VR-5000 by pressing BATTERY, DC, and AC switch in this order.

.4 Pull the lever outward and then unlock the key on the HD. (Position C, downward)

.5 Pull the lever to remove the HD.

.6 Insert the HD into the cartridge by reversing above procedures.

.7 Look the key on the HD. (Position A)

.8 Turn on VR-5000.

1.6 HOW TO REMOVE DRU

To remove the DRU from the bracket (cradle);

1. Loosen the hand-tightened cap.

2. Pull the DRU cable straight out.

(The cable may be cut after an incident.)

3. Remove two snap pins and then

two hinge pins.

4. Lift the release levers.

2. DRU cable

1. Cap

3. Hinge pin

3. Snap pin

4. Release levers

lock

Cartrid

e frame

Lever

Power indicato