User guide

Euphonix SH612 Studio Hub User Guide Getting Started
7
1.3 AES Sync
AES Sync signals originate from the SH612. AES Sync signals can be looped a maximum
of four times. If additional AES signals are required, use an AES distribution amplifier.
The four AES sync outputs on the SH612 deliver AES sync to:
• The FC631 card on the DF64(s)
• AM713(s) and DM714(s)
• MA703(s) and MD704(s)
• Other devices that accept AES Sync whose sample rate needs to be locked to
the System 5 sample rate.
Figure 1-1 AES sync connections for the SH612
Daisy Chain to FC631
Cards on all DF64s
Daisy Chain to all
MADI
Input Devices
Daisy Chain to all
MADI
Output Devices
Connect to any
Additional Devices
Which Require
AES
Sync
The SH612 Can Lock to
the AES Sync Signal From
Another Device at this Port
THRU
AES/SYNC
SH 612
IN OUT
WORD