User guide

Euphonix SH612 Studio Hub User Guide Front and Rear Panel Interface
16
2.2 Rear Panel Connectors
Figure 2-7 SH612 Rear Panel
AES Sync In (female XLR): Connect to house AES Sync source.
AES Sync Out Ports (four male XLR): Outputs AES Sync. We recommend using
AES Sync for all System 5 MADI devices closer than 50 ft from the Studio Hub.
Typically, Out 1 connects to the DF64s, Out 2 connects to MADI input devices, and
Out 3 connects to MADI output devices. Out 4 is a spare for any additional devices
requiring AES Sync.
Word In (BNC): Connect this port to the house Word Clock source.
Word Out (BNC): Connect this port to any device that requires Word Clock. Typically,
MADI Converters located more than 50 ft from the Studio Hub use Word Clock instead
of AES Sync. The Word Clock at this port is always locked to the selected sync source.
MADI In / Out Ports (24 BNC) Digital audio in and outs. These connect to the MADI
Converters. See the MADI Hookup diagrams in the System 5 Technical Overview for
details on these connections.
Vid-Sync In (BNC): The Vid-Sync In port can accept blackburst or composite video
as a master clock signal. No output occurs at the Video Out port when using this port.
Video In (BNC): The Video In port can accept blackburst or composite video or any-
thing with VITC embedded as a master clock signal. The signal input to Video In port
is sent through to the Video Out port. VITC delivered to the input or internally created
can be routed to Video Out.
Video Out (BNC): Outputs VITC time code when a video signal is present at the Video
In port.
THRU
AES/SYNC
SH 612
123456
78
9101112
IN IN IN IN IN INOUT OUT OUT OUT OUT
IN IN IN IN IN INOUT OUT OUT OUT OUT
OUT
M
A
D
I
CONTROL IEEE 1394VIDEOVID-SYNCWORD
IN OUT
LTC
IN
OUT
IN OUT THRU
SERIAL MC
RS-422
MTC/MMC
OUT