Specifications

Euphonix MADI Converters Operation Manual DM714 and MD704 Converters

3.4 DM714 Rear Panel

Figure 3-2 DM714 Rear Panel

Input Voltage Selector: This red switch allows the unit to operate in either 110/

115 VAC or 220/230/240 VAC environments. A fuse must also be changed for 220/

230/240 VAC operation (see page 8). Units are shipped set and fused for 110/115 VAC.

Power Connector (IEC) and Fuse Tray: The IEC power connector accepts standard

IEC power cords. The fuse tray contains both the active fuse and a spare fuse for 220/

230/240 VAC operation. See page 8 for instructions on how to change the fuse for 220/

230/240 VAC operation.

AES/EBU Digital Inputs (female XLR): 12 AES/EBU stereo inputs.

Parallel AES/EBU Digital Inputs (female DB25): Three 8-channel digital connectors

function in parallel with XLR digital inputs, and should not be used simultaneously

with the XLR inputs. See Figure 3-4 on page 34 for pinout diagram.

Auxiliary Analog Inputs (female XLR): Two balanced analog inputs on XLR connec-

tors. Input sensitivity is set from the front panel.

Auxiliary AES/EBU Digital Input (female XLR): Stereo AES/EBU digital input on

one XLR connector. Functions in parallel with the auxiliary S/PDIF input and the two

inputs should not be used simultaneously.

Auxiliary S/PDIF Digital Input (RCA): Stereo S/PDIF digital input on one RCA con-

nector. Functions in parallel with the auxiliary AES/EBU input and the two inputs

should not be used simultaneously.

AES Sync In (female XLR): Master clock input for the converter when using AES as

Sample Rate Source.

AES Sync Thru (male XLR): Outputs the same signal connected to AES Sync In.

Word In (BNC): Master clock input for the converter when using Word Clock as

Sample Rate Source.

DM714

1-8

PARALLEL AES/EBU INPUTS

9-16

17-24

IN OUT

WORD

AES

SYNC

DIGITAL

INPUTS

AES/EBU

INPUTS

MADI

OUT

S/PDIF

D1/D2

A1A2

AES

D1/D2