Specifications

Euphonix MADI Converters Operation Manual DM714 and MD704 Converters

3.3 DM 714/MD704 Front Panel

This section discusses both front panels and notes their few differences.

Figure 3-1 DM714 Front Panel

Signal Strength LEDs: Each of the 28 channels has a four-segment LED that repre-

sents the following signal levels: -42 dB, -18 dB, -6 dB (green), -.05 dB (red).

Trim Pot: A trim pot adjusts the analog output level of channels A1 and A2 between

+12 and +26 dBu in 2-dB steps.

Sample Rate LEDs: These LEDs indicate the Sample Rate to which the converter is

currently locked. Sample Rates are auto-sensed but can be manually selected on the

DM714. Supported Sample Rates are 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz and Custom

Rates from external sources.

Sample Rate Source LEDs: These LEDs indicate the format of the Sample Rate

Source to which the converter is currently locked. Sample Rate Source can be auto-

sensed or manually selected. If an external source is not detected, the DM714 reverts to

Internal sync; the MD704 mutes its outputs. If a manually selected source is not present,

the Sample Rate Source indicator blinks.