Specifications

Chapter 8: MADI Modules 81
SETUP Page
This page sets up MADI and error processing parameters.
MADI Bypass
Selecting Active bypasses MADI processing.
MADI Input
Selecting Input 1 or Input 2 manually activates that input.
Selecting Auto automatically switches over from Input 1 to Input 2 if Input 1 fails due to loss of signal.
Error Processing
This is used for remote system monitoring. Select Active to enable bus error detection.
Error Mask (BUS)
This turns on error detection for individual busses (S1–S32)
MM936 Web Configuration Setup page
Error detection must be turned OFF for busses not in use to prevent bad module status message.