Specifications

Modular I/O Configuration Guide74
GPI Page
This page sets up frame-wide GPI numbers to trigger dedicated module functions.
If a GPIO system module detects a GPI input, it puts the associated GPI number on the CAN bus. Each frame module watches for
these GPI numbers and performs the programmed action if it reads that number on the CAN bus.
Preset 1–8
A GPI input can be entered to trigger a preset recall.
MADI Bypass On
Set a GPI input can be entered to trigger MADI Bypass On (MADI In to MADI out) bypassing the MADI routing.
Do not assign the same GPIO numbers to different functions because this incorrectly triggers multiple functions.
MM935 Web Configuration GPI page