Specifications

Modular I/O Configuration Guide62
2 Click SAVE LICENSE INFO and an XML file is generated that should be saved and sent to Avid sales/support. Avid returns a Li-
cense File that must be uploaded to the FC972 Remote.
3 Click the SEARCH button to navigate to the file.
4 Click APPLY LICENSE NOW.
SNMP Functions Setup
Modular I/O supports SNMPv1 GET PDUs (Protocol Data Unit) for polling the Modular I/O frame only. SNMP SET PDUs are not
supported. The agent may also send Traps on predefined conditions and/or fire GPOs using GPIO interface(s). SNMP protocol is
an optional Modular I/O system feature that can be purchased if required.
To set up SNMP functions if the SNMP option has been activated:
1 Open the FC972 SYSTEM CONFIG page. The Frame Name, Frame Location, and System Contact are used by the SNMP sysObject
OIDs (Object Identifier).
2 Click SET FRAME INFORMATION.
3 Enter a Trap Sink IP Address, Trap Port, and the Trap Community string, which must be used for basic authorization.
4 Select desired SNMP Traps and/or set a GPO number for GPIO modules to use.
5 Click CHANGE SNMP CONFIGURATION when finished.
We recommend updating modules before applying the license key file to the frame because some license features require the latest
firmware.
SNMP Setup
SNMP Trap Configuration