Specifications

Chapter 7: FC972 Remote 55
3 Open a browser (IE7. Firefox 3.0 or higher) and enter the FC972’s IP address in the URL field (i.e., http://10.110.134.142).
4 Click on the wrench tool on the CONTROLLER field. This opens the FC972’s SYSTEM CONFIG page.
5 Enter the proper NETWORK settings.
6 Select CHANGE NETWORK CONFIGURATION.
7 Reboot the FC972.
8 Reconfigure the PC’s network address to communicate with the FC972 if necessary.
Frame Controller Overview page
NETWORK settings
REBOOT CONTROLLER tab
wrench tool