Manualshelf

Specifications

ManualsBrandsEuphonix ManualsMusical equipmentModular I/O
11121314151617181920
Modular I/O Configuration Guide18
Synchronization
To configure each frame for synchronization:
1 To avoid damaging analog circuitry, make sure the AC power is off before beginning the installation.
2 Install the MM936 MADI in a reserved slot in the IO94 Frame and set it as Master.
3 Install the SY983 in a reserved slot in the IO93 Frame and set it as Master.
Control
To set up remote control for the IO94 and IO93 Frames:
1 Set the FC972 Remote to IP Address range:
IO94: 192.168.0.150~156/255.255.255.0
IO93: 192.168.0.157~159/255.255.255.0
(192.168.0.150~156 skipped because this frame does not contain mic preamps.)
2 Set the Gateway for both frames to 192.168.0.1 for configuration by console system computer.
Module CAN IDs
Set the CAN ID of each module to match the table below.
See each module’s section in Part III to learn how to set its CAN ID.
IO94 Stagebox
Module CAN ID
AD914 #1
0
AD914 #2
1
AD914 #3
2
AD914 #4
3
AD914 #5
4
AD914 #6
5
AD914 #7
6
AD914 #8
7
AD914 #9
8
AD914 #10
9
AD914 #11
10
AD914 #12
11
MM936
12