Specifications

Chapter 11: Dolby D/E Modules 159
SETUP/ROUTING Page
This page configures the module’s audio bus routing.
From C8000 System Bus
This assigns audio busses to the encoder for their respective signals. The encoder input labels show the configuration of signals
the encoder expects. For example, if the eight input signals are multiplexed in 8ch mode, make sure the source module is also con-
figured to output in 8ch mode.
Metadata
Metadata may be inserted in the USER bits of the PCM signal(s) on the frame’s audio busses. Select the audio bus from which
metadata should be read.
Input Mux
The input signal format can be set to 8ch or 2ch.
AC-3
An AC-3 signal may be provided on the Ch 9/10 source for D-to-D+ transcoding.
Gain
This field sets the gain to the encoders.
DE912 Web Configuration Setup/Routing page