Specifications

Modular I/O Configuration Guide146
SETUP/ROUTING Page
This page configures the module’s audio bus routing.
From C8000 System Bus
This assigns audio busses to the encoder for their respective signals. The labels at the encoder input show which signals the en-
coder expects due to its configuration determined by PROGRAM CONFIG (see page 138). If the eight input signals are multi-
plexed in 8ch mode, make sure the source module is also configured to output in 8ch mode.
Input Mux
The input signal format can be set to 8ch or 2ch.
Metadata
Metadata may be inserted in the USER bits of the PCM signal(s) on the frame’s audio busses. Select the audio bus from which
metadata should be read.
PCM
A delay can be applied to an independent signal selected from the bus (PCM or encoded).
Delay
A two-channel delay (up to 4 frames) is provided to compensate for the Dolby E encoding delay.
To C8000 System Bus
This assigns the encoder output to the frame’s busses and to the external BNC output.
DE911 Web Configuration Setup/Routing page