Specifications

Modular I/O Configuration Guide140
Technical Specifications
External synchronization is possible using SY983 (PAL, NTSC, HD) if Dolby E decoding must be frame-accurate.
External input
Connector BNC
Impedance 75 
Signal Level 0, 1–2.5 Vpp
Standard AES3, SMPTE 276M unbalanced
Data Format 16-, 20-, 24-bit
Sample Rate 32–48 kHz
Input audio formats
Dolby E 16-, 20-, 24-bit streams, 48 kHz
Dolby Digital 16 or 32-bit streams, 32–48 kHz
Latency
Dolby E 1 video frame
Dolby Digital 32 ms
PCM < 10 ms
Metadata Output
Format
Standard Dolby Metadata stream (RS485)
according to SMPTE RDD 6-2008
Baud Rate 115.2 kbps
Connector male 9-pin D-Sub
General
Connector 75 BNC
Backplane Connector DIN41612, 64-pin, a+b, male
Power Supply +5 VDC
Power Consumption ~500 mA
Dimension 3 RU, 4 HP (1 slot)
Temperature 10–40°C
Humidity 90%, non-condensing